Divotloft
How to Build a DIY Golf Simulator at Home: Parts List and Costs
AI-generated image

How to Build a DIY Golf Simulator at Home: Parts List and Costs

By Divotloft . 12 min read . Updated November 2026

Building your own golf simulator at home means buying each part separately, which gives you control over room size and cost, but only if you buy in the right order. This guide lists every part a home build needs, from the launch monitor that decides your software to the floor tiles under the hitting mat, with the price range for each part from our product catalog. Measure the room first, since that costs nothing and rules sizes in or out. Make the Garmin Approach R10 Launch Monitor your first purchase, because it sets which simulator software you can run. Then order the screen, size the projector to it, and finish with the mat, floor, and accessories. The listed parts come to about $2,855 to $4,005. A conduit frame adds about $210 to $400, for roughly $3,065 to $4,405 in all, and that total leaves out the computer or tablet that runs the software and underlayment for a concrete floor.

Quick answer

A DIY golf simulator costs about $3,065 to $4,405 with a conduit frame, using catalog prices for a Garmin Approach R10, a Carl's Place screen, an Optoma GT2100HDR projector, a Country Club Elite mat, a year of GSPro, and small accessories. The total excludes the computer and underlayment.

This guide contains affiliate links. Divotloft may earn a commission at no cost to you.

What parts does a DIY golf simulator need?

The Garmin Approach R10, a Carl's Place custom impact screen, an Optoma GT2100HDR projector, and a Country Club Elite hitting mat form the core of a budget DIY build.

Around that core sit a AllSportSystems SkyRail Sliding Projector Ceiling Mount, side barrier netting from Golf Simulator Side Barrier Safety Netting, SimTurf Foam Floor Tiles for Golf Simulator Rooms around the mat, and simulator software such as GSPro Annual Subscription, for eight required parts in all. Prices below come from our product catalog.

Three costs sit outside those eight parts. The frame is not in our catalog, so its price comes from a third-party build guide in the frame section below. The computer or tablet that runs the software is not priced. Underlayment is only needed on a concrete floor, and it is covered in the flooring section.

AllSportSystems SkyRail Sliding Projector Ceiling Mount
4.5 flooring accessories

AllSportSystems SkyRail Sliding Projector Ceiling Mount

A sliding ceiling-mounted projector arm with a 48-inch rail that lets you shift the projector fore and aft to dial in screen fill for both 4:3 and 16:9 formats without unscrewing the mount from the ceiling.

Golf Simulator Side Barrier Safety Netting
4.3 enclosures screens

Golf Simulator Side Barrier Safety Netting

Standalone side barrier panels that mount beside an impact screen or enclosure to catch wide pulls and pushes that miss the main screen surface, an important safety addition for any custom enclosure build.

SimTurf Foam Floor Tiles for Golf Simulator Rooms
4.5 flooring accessories

SimTurf Foam Floor Tiles for Golf Simulator Rooms

Purpose-built 5/8-inch interlocking foam tiles designed to pair with SimTurf putting surface and hitting mats at a matching 1-inch total height, so the hitting mat drops in flush with the surrounding studio floor.

GSPro Annual Subscription
4.8 simulator software

GSPro Annual Subscription

The most popular home golf simulator software in 2026, powered by the Unity engine with 4K graphics, online multiplayer, 2,500-plus community courses, and a flat $250 per year with no tiered upsells.

Which launch monitor should a DIY build buy?

The Garmin Approach R10 is the budget launch monitor for a DIY build, priced at $499 to $549, and the unit itself has no mandatory subscription (GSPro and E6 Connect are separate paid software).

It works with GSPro and E6 Connect, and it estimates spin indoors rather than measuring it directly, which is the main trade-off against pricier units.

The Rapsodo MLM2PRO Mobile Launch Monitor is the first upgrade if spin accuracy matters, at $699 to $749, since its dual camera and Doppler radar hybrid measures spin directly.

Above that, the SkyTrak ST MAX Launch Monitor at $1,695 to $1,995 and the Bushnell Launch Pro Launch Monitor at $2,999 to $3,499 push a home build well past the totals in this guide.

Rapsodo MLM2PRO Mobile Launch Monitor
4.7 launch monitors

Rapsodo MLM2PRO Mobile Launch Monitor

A dual camera and Doppler radar hybrid that delivers directly measured spin, club path, and attack angle data at under $700, the most complete affordable launch monitor for home simulator use in 2026.

SkyTrak ST MAX Launch Monitor
4.6 launch monitors

SkyTrak ST MAX Launch Monitor

SkyTrak's current flagship photometric launch monitor with dual Doppler radar, dual USB-C ports for simultaneous charging and play, and integrated speed training powered by GOLFTEC, priced at $1,695 to $1,995.

Bushnell Launch Pro Launch Monitor
4.6 launch monitors

Bushnell Launch Pro Launch Monitor

A photometric launch monitor using Foresight Sports GC3 technology in a Bushnell-branded package, delivering club face data, spin, and ball flight metrics at a price point between consumer and professional units.

What does the impact screen and side netting cost?

The Carl's Place Premium Golf Impact Screen is the custom-sized screen for a DIY build, priced at $299 to $699 and sized down to the inch to hang in a frame you build.

Side containment comes from Golf Simulator Side Barrier Safety Netting panels at $25 to $40, and a custom screen needs netting on both sides before the first swing. The listing does not say how many panels that price covers, so check before you order.

Plan the screen width with the throw math in the next section, since a wider screen needs a longer throw from the projector.

Our room setup guide puts a ball traveling 90 to 100 mph that misses the screen at a real risk to walls and vehicles, which is why side netting is not optional.

Golf Simulator Side Barrier Safety Netting
4.3 enclosures screens

Golf Simulator Side Barrier Safety Netting

Standalone side barrier panels that mount beside an impact screen or enclosure to catch wide pulls and pushes that miss the main screen surface, an important safety addition for any custom enclosure build.

What frame does a DIY screen need, and what does it cost?

A frame built from 3/4-inch or 1-inch EMT conduit is the budget route for a DIY screen, and a Canvas Etc build guide puts the frame, fittings, and fasteners at about $210 to $400 at its early-2025 basic tier.

The same guide says EMT holds stable over spans of about 10 to 12 feet, while Schedule 40 PVC needs intermediate supports on spans over 6 to 8 feet or it sags and loses screen tension.

Amateur Golf builds its frame from 2x4 lumber instead. Its side frames are cut to the floor-to-ceiling height minus 1.5 inches, the top 2x4 is cut to the width between the sides, and the frame sits 10 to 12 inches from the back wall. That guide lists no lumber prices, so a wood frame needs a quote from a local supplier.

Settle the frame width and the screen width together, because the custom screen is cut to the inch. The conduit prices are from early 2025 and exclude tools, so treat $210 to $400 as a planning range and confirm current prices before you buy.

Which projector and mount fit a DIY screen?

The Optoma GT2100HDR is the budget projector for a DIY build, priced at $999 to $1,199 with a 0.496:1 throw ratio and 4,200 ANSI lumens.

The 1080p resolution of the Optoma GT2100HDR Short Throw Projector is softer than 4K, which is the main trade for the lower price. Divide throw distance by screen width to get your ratio, so a projector 8 feet from a 10-foot screen needs a ratio of about 0.8:1. At the 0.496:1 ratio of the GT2100HDR, a 10-foot screen needs the lens about 5 feet away. The BenQ TK710STi Golf Simulator Projector is the 4K laser step up, at $1,799 to $2,199 with a 0.69 to 0.83 throw ratio.

Mount the projector with an AllSportSystems SkyRail Sliding Projector Ceiling Mount, priced at $300 to $325, whose 48-inch sliding rail lets you adjust the throw after the anchor is installed.

Set the lens at least 12 to 18 inches above the top of a full driver backswing, the clearance our projector placement guide recommends. Short-throw units like these hang ahead of the golfer, between the golfer and the screen, so check swing clearance and shadows at the actual throw distance before you fix the mount.

Our room setup guide sets 9 feet of clear ceiling above the hitting mat as the practical minimum, measured to the lowest joist or duct rather than the highest point of the room.

Optoma GT2100HDR Short Throw Projector
4.5 projectors

Optoma GT2100HDR Short Throw Projector

A proven short throw 1080p laser projector with a 0.496:1 throw ratio priced under $1,200, the go-to budget option for tight simulator rooms where the projector must sit close to the screen.

BenQ TK710STi Golf Simulator Projector
4.7 projectors

BenQ TK710STi Golf Simulator Projector

A true 4K laser short throw projector with a 0.69 to 0.83 throw ratio, Golf Mode color calibration, and IP5X sealed optics rated for dusty garage environments, priced roughly $700 to $900 below the flagship AK700ST.

AllSportSystems SkyRail Sliding Projector Ceiling Mount
4.5 flooring accessories

AllSportSystems SkyRail Sliding Projector Ceiling Mount

A sliding ceiling-mounted projector arm with a 48-inch rail that lets you shift the projector fore and aft to dial in screen fill for both 4:3 and 16:9 formats without unscrewing the mount from the ceiling.

What hitting mat and floor tiles should a DIY room use?

The Country Club Elite by Real Feel Golf Mats is the default hitting mat for a DIY build, priced at $249 to $499 with dense nylon turf and a 5/8-inch closed-cell foam base.

Around the mat, SimTurf Foam Floor Tiles for Golf Simulator Rooms at $149 to $299 are 5/8-inch tiles, and the listing says they total 1 inch when paired with 3/8-inch SimTurf, which matches most 1-inch hitting mats. The Rubber Gym Mat Floor Underlayment for Simulators is also 3/8-inch and adds height to the stack, so measure your mat before you decide whether tiles and underlayment will sit flush with it.

On a concrete slab the underlayment costs $79 to $179 and keeps moisture from wicking up into the foam. It is not in the totals in this guide, so add it if your floor is concrete.

A Fiberbuilt Grass Series Studio Mat Center 9x4, priced at $1,499 to $1,599, is the permanent-studio option, and at roughly three times the top price of the Real Feel Country Club Elite Golf Mat it is not needed for a first build.

SimTurf Foam Floor Tiles for Golf Simulator Rooms
4.5 flooring accessories

SimTurf Foam Floor Tiles for Golf Simulator Rooms

Purpose-built 5/8-inch interlocking foam tiles designed to pair with SimTurf putting surface and hitting mats at a matching 1-inch total height, so the hitting mat drops in flush with the surrounding studio floor.

Rubber Gym Mat Floor Underlayment for Simulators
4.3 flooring accessories

Rubber Gym Mat Floor Underlayment for Simulators

A 3/8-inch dense rubber mat roll or tile underlayment that goes beneath foam tiles on concrete floors to absorb shock, prevent moisture migration, and add meaningful sound deadening to a garage or basement sim room.

Fiberbuilt Grass Series Studio Mat Center 9x4
4.7 hitting mats

Fiberbuilt Grass Series Studio Mat Center 9x4

A 9-foot by 4-foot studio mat with a center hitting position that creates a wide stance area on both sides, Fiberbuilt's standard recommendation for a complete home simulator floor setup, priced at $1,499.

Real Feel Country Club Elite Golf Mat
4.6 hitting mats

Real Feel Country Club Elite Golf Mat

A 110-ounce dense nylon mat on a 5/8-inch closed-cell foam base that accepts real wooden tees, cushions joints on fat shots, and pairs well with photometric launch monitors that read the lie at impact.

Which simulator software fits the build?

GSPro at a flat $250 per year is the software to budget for, with over 2,500 community courses, 4K graphics, and online multiplayer.

GSPro Annual Subscription is Windows-only and needs a capable PC with a dedicated graphics card, and our GSPro vs E6 Connect comparison recommends 16GB of RAM and an SSD.

E6 Connect Golf Simulator Software, a separate paid subscription from TruGolf whose price you should check with TruGolf, is the fallback when your launch monitor works with E6 but not GSPro. E6 Connect also has an iOS version for iPad and iPhone, so check whether your launch monitor supports it there before you assume a PC is required. The Golf Club 2019 Simulator Software, priced at roughly $1,000 once, avoids a subscription entirely.

Free WGT Golf Simulator Software lets you test simulation before paying for anything, though its graphics and course realism lag the paid platforms.

GSPro Annual Subscription
4.8 simulator software

GSPro Annual Subscription

The most popular home golf simulator software in 2026, powered by the Unity engine with 4K graphics, online multiplayer, 2,500-plus community courses, and a flat $250 per year with no tiered upsells.

E6 Connect Golf Simulator Software
4.4 simulator software

E6 Connect Golf Simulator Software

One of the longest-running golf simulation platforms, which TruGolf says works with over 18 launch monitors, sold as a separate paid subscription from TruGolf whose price you should check with TruGolf.

Check with TruGolf Check price on Amazon
The Golf Club 2019 Simulator Software
4.2 simulator software

The Golf Club 2019 Simulator Software

The only major golf simulation platform without a recurring subscription, a one-time purchase of roughly $1,000 that unlocks permanent access to 170,000-plus player-created courses with no annual renewal.

WGT Golf Simulator Software
3.8 simulator software

WGT Golf Simulator Software

A free-to-play golf simulation platform with browser and PC app access, with launch monitor support to confirm on WGT's site, and a useful way to test golf simulation before committing to a paid platform.

Which small accessories are worth adding to the build?

The Golf Simulator Ball Tray with Phone Holder costs $49 to $89 and holds 50 to 80 range balls at standing height beside the mat.

The Golf Simulator Impact Tape Roll (Club Face Tape) costs $12 to $22 and the alignment sticks cost $24 to $34. The tape shows face contact on every swing, and the sticks add path and alignment gates.

Keep the Golf Simulator Ball Tray with Phone Holder beside the mat so balls and a phone showing launch monitor data stay within reach.

The Carl's Place Clubhouse Classic Club Holder is optional at $199.95 and has 13 club slots. It is the first line item to cut when the budget is tight.

Golf Simulator Ball Tray with Phone Holder
4.3 flooring accessories

Golf Simulator Ball Tray with Phone Holder

A waist-height rubber ball tray that holds 50 to 80 range balls beside the hitting mat with an integrated phone or tablet holder for viewing launch monitor data or streaming software without bending or reaching during a session.

Golf Simulator Impact Tape Roll (Club Face Tape)
4.4 flooring accessories

Golf Simulator Impact Tape Roll (Club Face Tape)

Self-adhesive paper or film tape applied to club faces that leaves an imprint of the ball contact point on every swing, a simple diagnostic tool that works alongside any launch monitor to confirm strike location.

Athletico Alignment Stick Set (6-Piece) for Simulator Training
4.5 flooring accessories

Athletico Alignment Stick Set (6-Piece) for Simulator Training

A set of six flexible fiberglass alignment sticks that slot into the turf beside the hitting mat to train swing path, ball position, and alignment during simulator sessions, a simple training aid with outsized feedback value.

Carl's Place Clubhouse Classic Club Holder
4.5 flooring accessories

Carl's Place Clubhouse Classic Club Holder

A handcrafted composite wood club holder with 13 slots designed for a golf simulator room, made in Wisconsin, USA, and built to display the full set beside the hitting mat for quick club access during a round.

What does the full DIY build cost in total?

The Garmin Approach R10, Carl's Place screen, and Optoma GT2100HDR anchor a DIY build that totals about $3,065 to $4,405 with a conduit frame, using catalog prices for the listed parts.

The low figure adds the bottom of each catalog range and the high figure adds the top. It covers the launch monitor, screen, projector, mount, mat, foam tiles, one set of Golf Simulator Side Barrier Safety Netting, one year of GSPro Annual Subscription, the ball tray, impact tape, alignment sticks, and the conduit frame at $210 to $400. Without the frame, the parts come to $2,855 to $4,005.

It leaves out the PC or tablet that runs the software and underlayment, which adds $79 to $179 on a concrete slab. If the netting is sold one panel at a time, a second panel adds $25 to $40. The optional Carl's Place Clubhouse Classic Club Holder adds $199.95.

Measure the room first, then buy the launch monitor and screen, because those two choices set your software and room size for every other line item.

Golf Simulator Side Barrier Safety Netting
4.3 enclosures screens

Golf Simulator Side Barrier Safety Netting

Standalone side barrier panels that mount beside an impact screen or enclosure to catch wide pulls and pushes that miss the main screen surface, an important safety addition for any custom enclosure build.

GSPro Annual Subscription
4.8 simulator software

GSPro Annual Subscription

The most popular home golf simulator software in 2026, powered by the Unity engine with 4K graphics, online multiplayer, 2,500-plus community courses, and a flat $250 per year with no tiered upsells.

Carl's Place Clubhouse Classic Club Holder
4.5 flooring accessories

Carl's Place Clubhouse Classic Club Holder

A handcrafted composite wood club holder with 13 slots designed for a golf simulator room, made in Wisconsin, USA, and built to display the full set beside the hitting mat for quick club access during a round.

Is a hitting net cheaper than a screen build?

The Net Return Pro Series V2 at $649 to $799 is the no-screen alternative in our catalog, with automatic ball return rated for ball speeds up to 225 mph.

Net Return suggests about 14 feet of total room length: roughly 1 to 2 feet behind the net, 5 to 10 feet from ball to net, and 2 to 4 feet behind you. A Garmin Approach R10 Launch Monitor, a The Net Return Pro Series V2 Golf Net, and a Real Feel Country Club Elite Golf Mat total about $1,397 to $1,847 before software, using the same catalog prices as above.

Our net versus enclosure guide puts a net setup at about 14 feet of room length and an enclosure at 16 to 20 feet, so the net is the honest choice when the room is under about 16 feet deep.

Garmin Approach R10 Launch Monitor
4.5 launch monitors

Garmin Approach R10 Launch Monitor

A pocket-sized radar launch monitor priced around $500 with no mandatory subscription for the unit and compatibility with E6 Connect, GSPro, and over 42,000 Home Tee Hero virtual courses via the Garmin Golf app (Home Tee Hero needs a paid Garmin Golf membership).

The Net Return Pro Series V2 Golf Net
4.7 nets putting accessories

The Net Return Pro Series V2 Golf Net

An automatic ball return hitting net rated for ball speeds up to 225 mph with a 250,000-shot guarantee, tool-free assembly in five minutes, the standard premium practice net for home simulator setups.

Real Feel Country Club Elite Golf Mat
4.6 hitting mats

Real Feel Country Club Elite Golf Mat

A 110-ounce dense nylon mat on a 5/8-inch closed-cell foam base that accepts real wooden tees, cushions joints on fat shots, and pairs well with photometric launch monitors that read the lie at impact.

Featured in this guide

Garmin Approach R10 Launch Monitor
4.5 launch monitors

Garmin Approach R10 Launch Monitor

A pocket-sized radar launch monitor priced around $500 with no mandatory subscription for the unit and compatibility with E6 Connect, GSPro, and over 42,000 Home Tee Hero virtual courses via the Garmin Golf app (Home Tee Hero needs a paid Garmin Golf membership).

Carl's Place Premium Golf Impact Screen
4.5 enclosures screens

Carl's Place Premium Golf Impact Screen

A custom-spec woven polyester impact screen available in sizes down to the inch, designed to hang in an existing frame or custom enclosure build, with a bright projection surface and rated for repeated high-speed ball impacts.

Optoma GT2100HDR Short Throw Projector
4.5 projectors

Optoma GT2100HDR Short Throw Projector

A proven short throw 1080p laser projector with a 0.496:1 throw ratio priced under $1,200, the go-to budget option for tight simulator rooms where the projector must sit close to the screen.

Real Feel Country Club Elite Golf Mat
4.6 hitting mats

Real Feel Country Club Elite Golf Mat

A 110-ounce dense nylon mat on a 5/8-inch closed-cell foam base that accepts real wooden tees, cushions joints on fat shots, and pairs well with photometric launch monitors that read the lie at impact.

GSPro Annual Subscription
4.8 simulator software

GSPro Annual Subscription

The most popular home golf simulator software in 2026, powered by the Unity engine with 4K graphics, online multiplayer, 2,500-plus community courses, and a flat $250 per year with no tiered upsells.

Keep reading

Related comparisons

Related roundups

FAQ

Frequently asked questions

How much does a DIY golf simulator cost at home?+

At catalog prices, a DIY golf simulator totals about $3,065 to $4,405 with a conduit frame, including one year of GSPro and the small accessories. The Garmin Approach R10, a Carl's Place screen, and an Optoma GT2100HDR projector make up most of that. Without the frame the parts come to $2,855 to $4,005. The total leaves out the PC or tablet and underlayment for a concrete floor.

What should I buy first for a DIY golf simulator?+

Measure the room first, since it is free and sets your screen size. Then buy the launch monitor, because it determines which simulator software will work with your build. The Garmin Approach R10 at $499 to $549 works with GSPro and E6 Connect, so it is the common starting point for a budget build.

Do I need a dedicated PC for DIY simulator software?+

For GSPro, yes. It is Windows-only and needs a capable PC with a dedicated graphics card, and our comparison recommends 16GB of RAM and an SSD. E6 Connect also runs on Windows, but it has an iOS version for iPad and iPhone, so a tablet can work if your launch monitor supports E6 there. Either way, the computer is not counted in the totals above, so budget for it separately.

Can I build a DIY golf simulator in a one-car garage?+

Possibly, but tight. Our room setup guide sets 9 feet of clear ceiling and 10 to 11 feet of width for an 8-foot enclosure, and our net versus enclosure guide puts an enclosure at 15 to 20 feet deep. A narrower or shallower garage may suit a net setup better.

Do I still need side barriers if my screen is custom?+

Yes. A custom screen does not come with side netting, and the SIG kits sell theirs separately too, so add side barrier netting on both sides before the first swing. The panels are priced at $25 to $40, and the listing does not say how many panels that covers, so confirm before you order.

Is a DIY build cheaper than the SIG8 kit?+

Usually, yes. A Carl's Place screen at $299 to $699 plus a conduit frame at about $210 to $400 comes to about $509 to $1,099, against $1,500 to $1,800 for the SIG8, which comes with a ready-made push-pin pole frame. Neither figure includes side netting, which the SIG8 maker sells separately, and the DIY route adds your build time. The DIY route also pays off when your room needs a width a kit does not offer.