Best Golf Simulator Room Flooring and Accessories
The flooring under your simulator and the small accessories that complete the room, club racks, ball trays, projector mounts, and side barriers, turn a functional setup into a comfortable practice studio. Foam and rubber tiles protect concrete floors, cushion fatigue, and level the hitting mat to the stance area. Projector ceiling mounts need to position the lens precisely to eliminate swing shadows and fill the screen. We cover the complete finishing layer that completes any sim room build.
Divotloft may earn a commission from links below . Updated June 2026
The short answer
SimTurf foam floor tiles are the best flooring base for most home golf simulator rooms in 2026, pairing 5/8-inch interlocking foam tiles with optional putting turf cut-outs so the hitting mat drops in flush with the surrounding surface. For heavy concrete garage floors, a 3/8-inch rubber underlayment beneath the foam adds shock absorption and prevents moisture migration.
Top Pick
SimTurf Foam Floor Tiles for Golf Simulator Rooms
Purpose-built 5/8-inch interlocking foam tiles designed to pair with SimTurf putting surface and hitting mats at a matching 1-inch total height, so the hitting mat drops in flush with the surrounding studio floor.
Best for Sim room builders who want foam tile flooring that integrates cleanly with their hitting mat height.
2 AllSportSystems SkyRail Sliding Projector Ceiling Mount
A sliding ceiling-mounted projector arm with a 48-inch rail that lets you shift the projector fore and aft to dial in screen fill for both 4:3 and 16:9 formats without unscrewing the mount from the ceiling.
Best for Builders who want to optimize projector position after installation without permanent drilling adjustments.
3 Carl's Place Clubhouse Classic Club Holder
A handcrafted composite wood club holder with 13 slots designed for a golf simulator room, made in Wisconsin, USA, and built to display the full set beside the hitting mat for quick club access during a round.
Best for Sim room owners who want a quality club holder that looks as good as the rest of their setup.
4 Athletico Alignment Stick Set (6-Piece) for Simulator Training
A set of six flexible fiberglass alignment sticks that slot into the turf beside the hitting mat to train swing path, ball position, and alignment during simulator sessions, a simple training aid with outsized feedback value.
Best for Golfers who want to add a simple alignment and path training layer to their simulator practice sessions.
5 Carl's Golf Room Floor Tile System
Cushioned interlocking foam tiles from Carl's Place, designed for golf simulator floors, available in multiple colors and compatible with Carl's turf and mat systems for a coordinated studio look.
Best for Builders who are sourcing their enclosure, screen, and flooring all from Carl's Place for a matched system.
6 Golf Simulator Impact Tape Roll (Club Face Tape)
Self-adhesive paper or film tape applied to club faces that leaves an imprint of the ball contact point on every swing, a simple diagnostic tool that works alongside any launch monitor to confirm strike location.
Best for Golfers who want to confirm face-contact consistency alongside their launch monitor data.
7 Rubber Gym Mat Floor Underlayment for Simulators
A 3/8-inch dense rubber mat roll or tile underlayment that goes beneath foam tiles on concrete floors to absorb shock, prevent moisture migration, and add meaningful sound deadening to a garage or basement sim room.
Best for Builders on concrete slab floors who need moisture protection and shock absorption under their tile system.
8 Golf Simulator Ball Tray with Phone Holder
A waist-height rubber ball tray that holds 50 to 80 range balls beside the hitting mat with an integrated phone or tablet holder for viewing launch monitor data or streaming software without bending or reaching during a session.
Best for Golfers who practice high volumes and want fast access to balls and launch monitor data in one stand.
The method
How we chose
We evaluated each option on fit, build quality, daily usability, and value. Our top pick, SimTurf Foam Floor Tiles for Golf Simulator Rooms, earned the spot because the flooring system designed for simulator rooms, pairs cleanly with hitting mats for a flush finish. The comparison above highlights exactly who each pick is best for.
Related guides
FAQ
Best Golf Simulator Room Flooring and Accessories: FAQ
Do I need special flooring for a home golf simulator?+
Not strictly required, but highly recommended. Concrete is fatiguing to stand on for long sessions, does not absorb sound from ball impact, and creates a height mismatch if your hitting mat sits on top of bare floor without surrounding tile to level the stance area. Foam or rubber tile fills in that height and makes the room more comfortable for long practice sessions.
How do I level my hitting mat with the surrounding floor?+
The goal is for the top surface of the hitting mat to be flush or slightly proud of the surrounding floor so you do not catch a foot on the edge. Most quality hitting mats are roughly 1 inch thick. Pair them with SimTurf or similar tiles that match that height, cut out the tile in the mat footprint, and drop the mat in. The result is a seamless transition from mat to stance area.
What type of projector ceiling mount works best for a golf simulator?+
A ceiling mount with a telescoping arm or drop length gives you vertical adjustment so the projector can be positioned above the swing plane. For short throw projectors that mount directly above the screen, a rigid low-profile mount keeps the lens close to the ceiling and out of the swing arc. Adjustable mounts that allow tilt and rotation let you fine-tune screen fill after installation.
Do I need a ball tray for home practice?+
Not mandatory, but it makes sessions much more efficient. A ball tray holds a bucket of range balls at standing height beside the mat, so you can grab the next ball without bending down after every shot. In a real practice session of 50 to 100 balls, that translates to a lot of unnecessary bending. Combined with an automatic ball return net or a returner tee, a tray speeds up reps significantly.
What are side barrier nets and do I need them?+
Side barrier nets hang on either side of the enclosure or screen to catch shots that miss the main screen surface, particularly wide pulls or pushes. Most complete enclosure kits include them. If you have a full enclosure like the SIG10, side barriers are already part of the kit. If you built a custom screen setup, adding standalone side barrier panels is a safety step worth taking before inviting guests to swing.